Cordless Portable Water Transfer Pump
Cordless Portable Water Transfer Pump
🎁Buy More, Save More🎁
Couldn't load pickup availability
Cordless Portable Water Transfer Pump
There’s an Easier Way to Move Water
You already know how much work moving water can be.
💧 Maybe it’s a rain barrel that’s too heavy to tip.
🌿 Maybe it’s pond water you want to send over to the garden.
🚤 Maybe the pool needs draining or there’s water sitting in the bottom of the boat.
🛢️ Or maybe you need to transfer diesel or another compatible low-viscosity liquid from a deep container.
Whatever the job, carrying buckets, tipping heavy drums, and dragging extension cords gets old fast.
With this cordless pump, simply place the intake into the liquid, connect the hose, and switch it on. The long stick reaches into deep barrels, tanks, ponds, and other containers, while the hose sends the liquid where you need it.
✓ No heavy lifting
✓ No bucket after bucket
✓ No outlet required
Features
-
HIGH-FLOW TRANSFER WITH 15M HIGH-LIFT PERFORMANCE: Delivers a flow rate of up to 120 L/min (31.7 GPM) with a lift height of up to 15 m (49 ft), helping move large volumes of liquid quickly over longer distances or to elevated discharge points. Ideal for emptying barrels, tanks, pools, ponds, boats, flooded areas, and other liquid-storage containers.
- POWERFUL 200W BRUSHLESS MOTOR: Powered by a high-performance 200W brushless motor, the pump delivers strong and stable output for repeated liquid-transfer jobs. Compared with conventional brushed motors, it provides higher operating efficiency, lower noise, reduced wear, and a longer service life.
-
21V DUAL-BATTERY CORDLESS SYSTEM WITH POWER DISPLAY: Powered by a 21V rechargeable cordless system and supplied with two 10-cell lithium batteries and one charger, the pump helps extend working time and reduce interruptions between jobs. The integrated digital display clearly shows the remaining battery level, allowing you to recharge or replace the battery before power runs out.
- SMART DRY-RUN PROTECTION WITH EXTENDED-REACH DESIGN: Built-in dry-run protection automatically stops the pump when no liquid is detected, helping reduce unnecessary operation and the risk of damage to the motor and pump components. The extended cordless stick reaches deep into barrels, tanks, and containers without lifting or tilting them, while the detachable design makes carrying, storage, cleaning, and maintenance easier.
-
304 STAINLESS STEEL FOR WATER AND COMPATIBLE LOW-VISCOSITY OIL: The liquid-contact pump body is made from durable 304 stainless steel for improved strength, corrosion resistance, and reliable performance in wet working environments. Designed for transferring clean water and compatible low-viscosity oils in barrels, tanks, gardens, ponds, boats, workshops, agricultural settings, and general liquid-transfer applications. Do not use with gasoline, highly flammable liquids, thick oil, or corrosive chemicals.
Product Specifications
Motor Type: Brushless Motor
Rated Flow Rate: Up to 120 L/min
Rated Lift Height: 15 m / 49 ft
Rated Voltage: 21V
Pump Body Material: 304 Stainless Steel
Battery Type: 10-Cell Rechargeable Lithium Battery
Display: Battery Level Display
Protection Function: Automatic Shut-Off Without Liquid
Suitable Liquids: Clean Water and Compatible Low-Viscosity Oil
Package Includes
Every configuration includes:
- Cordless Liquid Transfer Pump
- Detachable Extension Tube
- Discharge Hose
- Spray Nozzle
- Quick Connector
- User Manual
Battery and charger quantities depend on the selected configuration.
Frequently Asked Questions
Find answers about compatible liquids, particles, hoses, batteries, reach, flow rate, and common applications.
What liquids can this pump transfer?
This pump is designed for water and compatible low-viscosity liquids, including diesel, kerosene, light motor oil, lubricating oil, hydraulic oil, cutting fluid, and vegetable oils such as rapeseed, soybean, and peanut oil.
Actual performance varies with liquid viscosity and temperature. Cold, thick, or degraded oil may flow more slowly or may not be suitable.
Can it pump gasoline or highly volatile liquids?
No. Do not use this pump with gasoline, alcohol, highly volatile or highly flammable liquids, corrosive chemicals, strong acids, strong alkalis, or liquids that have not been confirmed as compatible.
Diesel and kerosene should only be transferred in a well-ventilated area, away from flames, sparks, and hot surfaces.
What size particles can pass through the pump?
The pump can handle liquids containing fine suspended particles smaller than 1 mm, or approximately 1,000 μm.
It is not designed for gravel, stones, large leaves, thick mud, heavy sludge, long fibers, or concentrated debris. Larger material may block or damage the intake and pump mechanism.
Can it pump pond water with algae or fish waste?
Yes, provided the pond water contains only fine suspended matter smaller than 1 mm and does not contain heavy sludge, gravel, stones, large leaves, or dense plant material.
Keep the intake slightly above the pond bottom and away from concentrated sediment. Stop and clean the intake if the flow begins to decrease.
How can I avoid drawing in fish or young fish?
Keep the intake away from fish, fry, eggs, and areas where fish gather. Do not place the pump directly inside spawning areas or dense aquatic plants.
For ponds containing small fish, a suitable protective mesh may be placed around the intake. The mesh openings must be small enough to protect the fish but large enough to avoid severely restricting water flow.
Can I use a longer hose or connect a garden hose?
A longer hose may be used when its diameter and connector specifications are compatible with the pump outlet.
Longer or narrower hoses, sharp bends, and a higher discharge point will reduce the actual flow rate. Confirm the outlet size and adapter requirements before connecting a standard garden hose or purchasing an extension hose.
How long does each battery run?
Runtime depends on liquid viscosity, lift height, hose length, flow resistance, battery condition, and operating temperature. Pumping thicker oil generally requires more power and may reduce runtime compared with pumping water.
Battery quantity depends on the configuration selected. Available options include two batteries with charger, one battery with charger, or tool only without a battery or charger.
How deep can the pump reach?
The pump has an overall length of approximately 65 inches, making it suitable for many deep barrels, tanks, and containers. This physical reach is different from the 49 ft maximum head.
The 49 ft maximum head describes the vertical height the pump can overcome under specific conditions. It does not mean the stick is 49 ft long or that it can draw liquid from 49 ft below the operator.
Will it fit inside a 55-gallon drum?
It can be used with many open-top and wide-opening 55-gallon drums. Closed-top drum openings vary, so measure the opening before purchase and compare it with the maximum width of the intake assembly.
The extended design helps reach near the bottom without lifting or tipping the drum.
Will it always deliver 31.7 GPM?
The maximum rated flow is up to 120 L/min, or 31.7 GPM, under favorable test conditions. Actual flow varies with lift height, hose length, connector resistance, battery charge, particle concentration, and liquid viscosity.
Water and thin liquids generally flow faster than thicker oils. Maximum flow and maximum head are not achieved at the same time.
